12 Channel Mobile DVR Surveillance System

 

Unit Features

  • 12 channels of video and audio recording
  • Recording Rate : 120 FPS @ D1 resolution / 240FPS @ 2CIF /480 FPS @ CIF resolution (with global settings – record rate, resolution and quality can be set independently per-camera up to the maximum of 480 CIF-equivalent FPS)
  • H.264 compression format for efficient disk and network utilization
  • Front and rear panel video/audio outputs for easy connection and configuration
  • Special Graphical User Interface design for use with mobile small-sized monitors
  • Molex connectors for shock & vibration resistance; interface cables to BNC, RCA and power jacks supplied
  • Alarm Inputs & Outputs : 12 & 2 (alarm outputs are form “C”)
  • Embedded 3-axis g-sensor function with separate programmable alarm levels for X/Y and Z axis
  • Removable video storage hard disk; easy playback on PC (using EPR110C, sold separately)
  • Supports single 2.5” SATA hard disk standard (up to 2TB)
  • Supports multiple interfaces: 3xUSB , RS-485, RS-232, GPS port, wired Ethernet & IR Remote Control
  • Optional wireless 802.11 a/b/g with diversity antennas1
  • Provides regulated 12VDC camera power for 12 cameras; interface cables to power jacks supplied
  • Optional External EDGE/GPRS/CDMA/WI-FI Modules for cellular/specialized wireless Transmission
  • GPS function tracks speed and geographic limits (optional external GPS receiver) Power Supply : 10V~36VDC with Surge Protection, Voltage Regulation, programmable Delay on/off Delay on protects equipment from starter motor power surges; delay off allows recording even after ignition has been turned off
  • Temperature: -40°F~131°F (Operating), -40°F~185°F (Non-Operating)
  • System warnings: System fail LED : HDD full, HDD/Sys Temp, Fan fail, HDD fail LED : HDD power off, HDD failure
  • Email Alert: Multiple email notifications in response to alarms and events. (Requires real time network connectivity though cellular or WiFi service)
  • Event Alarm: Fan failure, hard disk temperature, hard disk failure, hard disk full, hard disk removed, power loss (after power is restored), network loss, GPS loss, GPS speed, GPS fencing,G sensor limits
  • Watchdog Function: Reboots DVR automatically if required

Return To Mobile DVR